Choose a Color

Corian is our primary supplier for Solid Surface. By clicking the link below, you’ll be able to browse their Solid Surface options.


Choose a Finish


Matte finish is recommended, especially in high traffic areas. It has little to no sheen and requires the least maintenance.


Satin has a slight sheen that may require extra attention, depending on traffic and use.


Semi-gloss finish has a higher sheen with some reflection that requires special instruction. It is not suggested for high use areas and may require a certified fabricator to maintain.


Gloss finish is only recommended for vertical surfaces, as it requires a certified fabricator to maintain.

Choose an Edge

Customize your countertops even further by choosing a shape for the edges. More edge options are available upon request.


Care and Maintenance

Routine Clean-ups

For regular cleaning of Solid Surface countertops, just wash with a damp cloth or sponge and some mild soap or non-abrasive household cleaner. Then, rinse with warm water and wipe dry.

Stubborn Residue

Apply the respective cleaner listed below and buff in a circular motion with a damp sponge. Then, rinse with warm water and wipe dry.

Matte – an abrasive cleaner

Satin – mildly abrasive cleaner

Semi-gloss – mild soap or detergent

Gloss – mild soap or detergent and a soft cloth


Always use a heat shield, hot pad, or trivet. While Solid Surface countertops are heat resistant, extreme heat can still cause damage. Do not cut directly on the countertop. Minor scratches may be repaired by the consumer, but deeper cuts may require a professional. Countertops must be wiped off immediately and rinsed thoroughly if they come in contact with any of the following chemicals:

Drain cleaners

Hair, textile, or food dyes

Oven cleaners

Rust removers

Toilet bowl cleaners